跳转到主内容

升级ONTAP后报告SPNotConfiged

Views:
Visibility:
Public
Votes:
0
Category:
fas-systems<a>2010045590</a>
Specialty:
HW
Last Updated:

适用场景

  • ONTAP 9
  • AFF C190
  • BMC (底板管理控制器)

问题描述

  • 在将ONTAP从9.9.1P11升级到9.13.1P9并将BMC自动更新从11.8升级到11.10后、 SPNotConfigured 报告以下错误。

Sat May 25 23:03:02 +0900 [node1: cf_hwassist:cf.hwassist.IpNotConfigured:error]: cf hw_assist: Partner(node2)'s SP is not configured with the right IP address family. Use the "storage failover hwassist show" command for details.
Sat May 25 23:37:21 +0900 [node1: nphmd: hm.alert.raised:alert]:Alert Id = SPNotConfiguredAlert , Alerting Resource = SP Config raised by monitor controller
Sat May 2523:18:43 +0900 [node2: cf_hwassist: cf.hwassist.IpNotConfigured:error]: cfhw_assist: Partner(node1)'s SP is not configured with the right IP addres family. Use the "storage failover hwassist show" command for details.
Sat May 2523:27:39 +0900 [node2: nphmd: hm.alert.raised:alert]: Alert Id =SPNotConfiguredAlert , Alerting Resource = SP Config raised by monitor controller

  • BMC IP地址如所示 unknownsysconfig-a

Service Processor       Status: Online
      Firmware Version:   11.10
      Mgmt MAC Address:   XX:XX:XX:XX:XX:XX
      Ethernet Link:    up, full duplex, auto-neg complete
      Using DHCP:      no
   IPv4 configuration:
      IP Address:     unknown
      Netmask:       unknown
      Gateway:       unknown
 IPv6configuration:         Disabled

  • e0M链接为 up,您可以访问管理IP,但 不能通过SSH访问SP。

slot 0: Gigabit Ethernet I210
e0M MAC Address: d0:XX:ea:XX:0d:XX (auto-1000t-fd-up)
Device Type: 0x1533 (BSD99)
Firmware Version: 3.25-7.5 0x80000674

  •  中没有SP网络配置信息 SP-LATEST-CONFIGURATION

cat /mnt/logs/etc/rlm_config_to_filer
=====================================
version 11.10
MAC d0:XX:ea:XX:1f:XX
dhcp 0
ip unknown
netmask unknown
gateway unknown
fpga: 1.0

  • 使用以下命令检查 SP公共链路、 显示链路已关闭。

Cluster::> system controller sp config show
               Firmware Booted    Auto Update SP       Link
Node           Version  Version   Configured  Status   Status Status
-------------- -------- --------- ----------- -------- ------ ---------
node1
               11.10    primary   false       online   down   ok
node2
               11.10    primary   false       online   down   ok
2 entries were displayed.

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.