跳转到主内容

通过上行链路交换机路径时、SAN主机报告磁盘设备故障

  1. 最后更新
  2. 另存为PDF
Views:
10
Visibility:
Public
Votes:
2
Category:
ontap-9
Specialty:
san<a>2009-192962</a>
Last Updated:

适用场景

  • SAN
  • FCP

问题描述

通过上行链路交换机路径时、SAN主机报告磁盘设备故障

例如：

  1. SAN主机仅通过FCP协议连接到switch01
  2. Switch01通过ISL (交换机间链路)连接到上行链路switch02
  3. NetApp存储通过不同的FC适配器连接到交换机01和交换机02
  4. 通过上行链路交换机访问LUN时、SAN主机间歇性报告磁盘(NetApp LUN)故障错误(SAN主机-> switch01-->switch02-->NetApp)

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.