ONTAP升级失败、并显示错误：重复的启动程序已映射到同一个LUN
适用场景
- ONTAP 9
- 自动化无中断升级（ ANDU ）
- iSCSI
问题描述
在启动程序包含大写字符的集群上升级ONTAP时、升级可能会失败、并显示有关无法标准化启动程序名称的错误。
在使用较新的ONTAP版本重新启动节点后、由于升级未完成、ANDU将暂停(例如：
cluster1::> version
NetApp Release 9.9.1P6: Tue Dec 21 13:38:22 UTC 2021
Info: The output from the version command above may not be correct because
upgrade is in progress or has failed in one or more nodes in the cluster.
Use the "upgrade-revert show" command in advanced mode to view the status
of upgrade.
cluster1::*> system node upgrade-revert show
(system node upgrade-revert show)
Node: cluster1-01 Status:
aborted
Status Message: The upgrade aborted. Contact support personnel for the upgrade repair procedure.
Vers Phase Status Upgrade Phase Status Message
---- ---------- -------- ------------------------------------------------------
1100 pre-root applied No upgrade is required for this phase.
1100 pre-apps applied Upgrade successful.
1100 post-apps applied Upgrade successful.
1400 pre-root applied No upgrade is required for this phase.
1400 pre-apps applied Upgrade successful.
1400 post-apps applied Upgrade successful.
2200 pre-root applied No upgrade is required for this phase.
2200 pre-apps applied Upgrade successful.
2200 post-apps aborted Duplicate initiators are mapped to the same LUN. Do not try to fix this problem. Using either the 'lun mapping delete' command or the 'lun igroup remove' command could lead to an outage. Contact technical support for assistance.