跳转到主内容

NTP 时钟偏差 - AutoSupport 消息

Views:
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
core
Last Updated:

适用于

  • ONTAP 9
  • ems.callhome.ntp.clock.skew.detected
  • callhome.ntp.clock.skew.detected
  • NTP CLOCK SKEW DETECTED

事件摘要

如果 ONTAP 系统时间与 ntp 服务器时间偏移超过 2 分钟,则会出现此消息。

[node01-02: mgwd: callhome.ntp.clock.skew.detected:error]: Callhome for "NTP CLOCK SKEW DETECTED". Clock skew of -172.8242 seconds detected between "node01-02" and "10.0.5.86".

验证

ASUP
  • 部分 NTPDC-PEER

   remote       local    st poll reach  delay   offset   disp
=======================================================================
=169.254.240.152 169.254.149.225  4 1024  377 0.00008 -0.004272 0.12306
=10.10.3.1     10.0.5.86    12 1024   0 0.00050 -172.8242 3.99217
*10.10.15.17    10.0.5.86     3 1024  377 0.00034 +0.004939 0.13930

命令行
  1. ::> set -privilege advanced
  2. ::*> cluster time-service ntp status show -instance

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.