升级集群交换机后报告的 SNMP 设置无效
适用场景
- 集群网络交换机
- 集群交换机固件升级
或
- 集群交换机升级
问题描述
::> system cluster-switch show
报告交换机由于以下原因而不受监控Invalid SNMP Settings
::> system cluster-switch show
Switch Type Address Model
--------------------------- ------------------ ---------------- -------------
Cluster-SW1 cluster-network 10.XX.XX.XX N9K-C9336C-FX2
Serial Number: XXXXXXXXXXXX
Is Monitored: false
Reason: Invalid SNMP Settings
Software Version: Cisco Nexus Operating System (NX-OS) Software, Version
9.3(5)
Version Source: CDP/ISDP
Cluster-SW2 cluster-network 10.XX.XX.XX N9K-C9336C-FX2
Serial Number: XXXXXXXXXXXX
Is Monitored: false
Reason: Invalid SNMP Settings
Software Version: Cisco Nexus Operating System (NX-OS) Software, Version
9.3(5)
Version Source: CDP/ISDP
- 在升级交换机固件或升级交换机型号后,可能会发生这种情况
- 接收以下运行状况监控器警报
hm.alert.raised: Alert Id = UnsupportedSwitch
- 可以通过ping从集群访问交换机管理端口
::> ping -node <nodename> -destination 10.XX.XX.XX