在 ONTAP 中下载固件映像失败，但在 LOADER 中使用节点下载成功

适用场景

• ONTAP 9
• 集群模式 Data ONTAP 8

问题描述

一旦节点启动 ONTAP ，下载新的 ONTAP 映像或固件文件将失败，但在从 HTTP 服务器的加载程序提示符处下载时（在节点上启动 ONTAP 之前），此操作将按预期运行。

示例：

LOADER-B> netboot http://192.168.0.3/95P12_q_image.tgz
Downloading 192.168.0.3/95P12_q_image.tgz ..
Extracting archive 192.168.0.3/95P12_q_image.tgz ..
Loading netboot/kernel:0x200000/15722280 0x10fe728/13882936 Entry at 0xffffffff802dc710
Found netboot/SB_XXI/platform.rc
Loading netboot/platform.ko:0x1e3c000/4076976 0x221f5b0/586840
Loading netboot/rootfs.img:0x22af000/331594752
Loading netboot/platfs3g.img:0x15eeb000/60960768
Closing network.
Starting program at 0xffffffff802dc710
NetApp Data ONTAP 9.5P12                          <<<---ONTAP is booting here
...
...
The Boot Menu will be presented because an alternate boot method was specified.
 
Please choose one of the following:
 
(1) Normal Boot.
(2) Boot without /etc/rc.
(3) Change password.
(4) Clean configuration and initialize all disks.
(5) Maintenance mode boot.
(6) Update flash from backup config.
(7) Install new software first.
(8) Reboot node.
(9) Configure Advanced Drive Partitioning.
Selection (1-9)? 7

This procedure will replace existing Data ONTAP software with new software.
Do you want to continue? {y|n} y

What is the URL for the package? http://192.168.0.3/95P12_q_image.tgz
What is the user name on "192.168.0.3", if any?

Checking network link... success.
Checking route to host "192.168.0.3"... success.
Attempting to reach 192.168.0.3... failed.

Verify that the network is properly configured, that the gateway is set
Correctly, and that the destination host is up.