由于FCP命令失败、存储上出现持续链路中断

最后更新
另存为PDF

Views:: 14

Visibility:: Public

Votes:: 0

Category:: ontap-9

Specialty:: san<a>传输的字词</a><a>Link b休息</a><a>2009956577</a><a>PLOGI FLOGI无效</a><a />

Last Updated:

适用场景

ONTAP 9.X
FCP

问题描述

当NetApp存储端口尝试登录到网络结构时、所有命令均显示为失败

[netapp-01: fct_tpd_work_thread_0: scsitarget.slifct.linkBreak:error]: Link break detected on Fibre Channel target HBA 2a with event status 1 , topology type 1, status1 0x0, status2 0x0.

[netapp-01: fct_tpd_work_thread_0: scsitarget.slifct.wqeError:debug]: FC port 2a has a WQE processing failure of type SLI_IO_FC_CT, command GPL, subtype x1, with status of 3 and an extended status x4 for NPIV port 0.

[netapp-01: fct_tpd_work_thread_0: scsitarget.slifct.wqeError:debug]: FC port 2a has a WQE processing failure of type SLI_IO_FC_CT, command RSPN_ID, subtype x2, with status of 3 and an extended status x4 for NPIV port 0.

[netapp-01: fct_tpd_work_thread_0: scsitarget.slifct.wqeError:debug]: FC port 2a has a WQE processing failure of type SLI_ELS_REQ, command FLOGI, subtype x0, with status of 3 and an extended status x4 for NPIV port 0.

[netapp-01: fct_tpd_work_thread_0: scsitarget.fct.loginfailed:error]: FC port 2a, NPIV port 0 failed fabric login with status of 3 and an extended status of x4.

[netapp-01: fct_tpd_work_thread_0: scsitarget.slifct.wqeError:debug]: FC port 2a has a WQE processing failure of type SLI_ELS_REQ, command FDISC, subtype x0, with status of 3 and an extended status x4 for NPIV port 2.

[netapp-01: fct_tpd_work_thread_0: scsitarget.fct.loginfailed:error]: FC port 2a, NPIV port 2 failed fabric login with status of 3 and an extended status of x4.

[netapp-01: fct_tpd_work_thread_0: scsitarget.slifct.wqeError:debug]: FC port 2a has a WQE processing failure of type SLI_ELS_REQ, command FDISC, subtype x0, with status of 3 and an extended status x4 for NPIV port 1.

[netapp-01: fct_tpd_work_thread_0: scsitarget.slifct.wqeError:debug]: FC port 2a has a WQE processing failure of type SLI_IO_FC_CT, command RSPN_ID, subtype x2, with status of 3 and an extended status x4 for NPIV port 2.

[netapp-01: fct_tpd_work_thread_0: scsitarget.slifct.wqeError:debug]: FC port 2a has a WQE processing failure of type SLI_ELS_REQ, command PLOGI, subtype x0, with status of 3 and an extended status x4 for NPIV port 0.

Invalid transmission word 在存储中记录、表示问题描述已启用SFP
交换机端SFP已更换、但问题描述仍继续