针对链路聚合报告 ClusterIfIslDownWarn_Alert 警告

最后更新
另存为PDF

Views:: 99

Visibility:: Public

Votes:: 0

Category:: fabric-interconnect-and-management-switches

Specialty:: hw

Last Updated:

适用于

ONTAP 9.10.1P4
FAS - AFF 系统
集群网络交换机

问题

系统间歇性报告以下类型的警告

HA Group Notification (Health Monitor process cshm: ClusterIfIslDownWarn_Alert[XXXXXXXXXXX/ Link Aggregate 1]) ALERT

构成链路聚合的端口的错误显示在 system health alert show的输出中

Cluster::> system health alert show

Node: Node-01

Resource: Link Aggregate 1

Severity: Major

Indication Time: Wed Aug 17 05:41:50 2022

Suppress: false

Acknowledge: false

Probable Cause: The cable used to connect switch "Switch01/

Link Aggregate 1" to the ISL port might be faulty.

For the port-channel, please check each individual link.

Possible Effect: Cluster redundancy might be lost.

Corrective Actions:

1) Check whether the cable is fully inserted into the interface port on both ends.

2) Reconnect the ISL port using another cable. After

reconnecting it, verify whether the link of the ISL

port is up by executing the commands per the switch

configuration guide or by checking whether the Link

status LED is on.

受影响的端口是 0/13 - 0/16，即集群网络交换机之间的交换机间链路 (ISL)
交换机上 show port all 的输出确认端口全部物理关闭

Admin Physical Physical Link Link LACP Actor

Intf Type Mode Mode Status Status Trap Mode Timeout

--------- ------ --------- ---------- ---------- ------ ------- ------ --------

0/1 Enable 10G Full 10G Full Up Enable Enable long

--More-- or (q)uit

0/2 Enable 10G Full 10G Full Up Enable Enable long

0/3 Enable 10G Full 10G Full Up Enable Enable long

0/4 Enable 10G Full Down Enable Enable long

0/5 Enable 10G Full Down Enable Enable long

0/6 Enable 10G Full Down Enable Enable long

0/7 Enable 10G Full Down Enable Enable long

0/8 Enable 10G Full Down Enable Enable long

0/9 Enable 10G Full Down Enable Enable long

0/10 Enable 10G Full Down Enable Enable long

0/11 Enable 10G Full Down Enable Enable long

0/12 Enable 10G Full Down Enable Enable long

0/13 PC Mbr Enable 10G Full Down Enable Enable long

0/14 PC Mbr Enable 10G Full Down Enable Enable long

0/15 PC Mbr Enable 10G Full Down Enable Enable long

0/16 PC Mbr Enable 10G Full Down Enable Enable long