在创建聚合期间、聚合容量可用消息输出的值不正确

最后更新
另存为PDF

Views:: 8

Visibility:: Public

Votes:: 0

Category:: ontap-9

Specialty:: core<a>2009年866983.</a>

Last Updated:

适用场景

ONTAP 9.12.1
Fusion大小评估工具

问题描述

创建期间显示的聚合容量与聚合的实际大小不同：

示例：

创建期间：

::> storage aggregate create -aggregate DATA_01 -diskcount 14 -node Node-01

The layout for aggregate "DATA_01" on node "Node-01" would be:

First Plex

RAID Group rg0, 14 disks (block checksum, raid_dp) Usable Physical Position Disk Type Size Size ---------- ------------------------- ---------- -------- -------- dparity 1.4.0 SSD - - parity 1.4.1 SSD - - data 1.4.2 SSD 6.99TB 6.99TB data 1.4.3 SSD 6.99TB 6.99TB data 1.4.4 SSD 6.99TB 6.99TB data 1.4.5 SSD 6.99TB 6.99TB data 1.4.6 SSD 6.99TB 6.99TB data 1.4.7 SSD 6.99TB 6.99TB data 1.4.17 SSD 6.99TB 6.99TB data 1.4.18 SSD 6.99TB 6.99TB data 1.4.19 SSD 6.99TB 6.99TB data 1.4.20 SSD 6.99TB 6.99TB data 1.4.21 SSD 6.99TB 6.99TB data 1.4.22 SSD 6.99TB 6.99TB

Aggregate capacity available for volume use would be 75.45TB.

创建后：

：：> storage聚合show

Aggregate Size Available Used% State #Vols Nodes RAID Status --------- -------- --------- ----- ------- ------ ---------------- ------------ aggr0_Node01 953.8GB 46.24GB 95% online 1 Node-01 raid_dp, normal aggr0_Node02 953.8GB 46.24GB 95% online 1 Node-02 raid_dp, normal DATA_01 79.64TB 79.64TB 0% online 1 Node-01 raid_dp, normal 3 entries were displayed.