跳转到主内容

FCP适配器报告"FCI.adapter.fabric.request.failed"错误

Views:
1
Visibility:
Public
Votes:
0
Category:
fas-systems<a>2008564407</a><a>用于翻译</a>
Specialty:
hw
Last Updated:

适用场景

  • FAS2552
  • ONTAP 8.2.4 7-模式

问题描述

  • Messages 报告以下错误。

示例:

Sun Nov 15 14:11:57 GMT [filer1:fci.adapter.fabric.login.failed:error]: Fibre Channel adapter 0f was unable to login with the fabric management server for reason 0x31.  
Sun Nov 15 14:13:16 GMT [filer1:fci.adapter.fabric.request.failed:error]: Fibre Channel adapter 0f returned unexpected status 0x4 for a fabric query.

 

  • Switch Port  ??sysconfig -a 显示在输出上。

示例:

   slot 0: FC Host Adapter 0f (QLogic 8324 rev. 2, N-port, )
      Firmware rev:      7.5.0
      Host Port Id:      0xxxxxxx
      FC Node Name:      5:00a:xxxxxx:xxxxxx
      FC Port Name:      5:00a:xxxxxx:xxxxxx
      SFP Vendor: AVAGO
      SFP Part Number:   AFBR-57D9AMZ-NA1
      SFP Serial Number: xxxxxxxxxxxx
      SFP Capabilities:  2, 4 or 8 Gbit
      Link Data Rate:   8 Gbit
      Switch Port:       ??

 

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.