跳转到主内容

ACP固件从02.10升级到02.12后、ACP模块停留在"正在重新启动"状态

Views:
5
Visibility:
Public
Votes:
0
Category:
fas-systems<a>2009年172336</a>
Specialty:
hw
Last Updated:

适用场景

  • 带内备用控制路径(ACP)
  • IOM6模块
  • ACP固件从02.10升级到02.12
  • FAS 或AFF 平台
  • ONTAP 9

问题描述

  • HA对中的一个节点或两个节点报告少数ACP模块处于"正在重新启动"状态 

Cluster::*> storage shelf acp module show
Node         Module Name     State
-----------------  ------------      -------------    
Node-N1        6.20.A        rebooting
          5.10.A        active
          6.20.B        rebooting
          5.10.B        active
Node-N2        6.20.A        rebooting
          5.10.A        active
          6.20.B        rebooting
          5.10.B        active

  • 在ONTAP 升级过程中、ACP固件从02.10升级到02.12、或者手动升级
  • 的输出acpadmin ibacp_list_all 将ACP模块显示 Current State0x17 、固件显示为 1.2.02.10

Cluster::> node run -node Node-N1 acpadmin ibacp_list_all
Number of ACP modules 4
MAC         SES   Last Contact  Protocol   Assigner   Shelf        Current Inband   IOM    shelf
Address       bit   (seconds ago) Version   ACPA ID    S/N         State   ID     Type   flag
---------------------------------------------------------------------------------------------------------------  
00:a0:98:XX:XX:XX  01    23161715    1.2.02.10   0      SHJHU171XXXXXXX   0x17   0d.20.A  IOM6    0x20
00:a0:98:XX:XX:XX  01    428       1.2.02.12   0      SHJHU171XXXXXXX   0xd   0d.10.A  IOM6    0x20
00:a0:98:XX:XX:XX  01    23132624    1.2.02.10   0      SHJHU171XXXXXXX   0x17   0b.20.B  IOM6    0x20
00:a0:98:XX:XX:XX  01    23126011    1.2.02.12   0      SHJHU171XXXXXXX   0xd   0d.10.B  IOM6    0x20

  • 受影响ACP模块的软重启未对模块状态进行任何更改

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.