备用磁盘在更换后显示容器类型未知

最后更新
另存为PDF

Views:: 45

Visibility:: Public

Votes:: 0

Category:: fas-systems<a>2008912990</a>

Specialty:: hw

Last Updated:

适用场景

ONTAP 9

问题描述

在磁盘更换容器类型显示未知后，磁盘已分配并显示为备用磁盘 sysconfig -r

RAID Disk Device   HA  SHELF BAY CHAN Pool Type  RPM  Used (MB/blks)   Phys (MB/blks)
 --------- ------   ------------- ---- ---- ---- ----- --------------    --------------
 Spare disks for block checksum
 spare    0c.35.23 0c    35  23  SA:A   0   SSD   N/A 381304/780910592  381554/781422768

storage disk show 在命令输出中，对于 Multipath-HA 配置中的 2 个节点， 4 个预期路径中的 2 个也只会显示该磁盘：

nonpfas100::> storage disk show -disk 5.35.23
 Disk: 5.35.23
 Container Type: unknown  
 Owner/Home: node1 / node1
 DR Home: -
 Stack ID/Shelf/Bay: 5  / 35 / 23
 LUN: 0
 Array: N/A
 Vendor: NETAPP
 Model: X438_PHM2400MCTO
 Serial Number: 3530XXXXXXXXX
 UID: 500000000:2C000000:00000000:00000000:00000000:00000000:00000000:00000000:00000000:00000000
 BPS: 520
 Physical Size: 372.6GB
 Position: present
 Checksum Compatibility: block
 Aggregate: -
 Plex: -
 Paths:
 LUN  Initiator Side        Target Side                                                                              Link
 Controller         Initiator     ID  Switch Port           Switch Port           Acc Use  Target Port              TPGN    Speed      I/O KB/s          IOPS
 ------------------ ---------  -----  --------------------  --------------------  --- ---  -----------------------  ------  -------  ------------  ------------
 node02         3b             0  N/A                   N/A                   AO INU  500003962c88298a             37  12 Gb/S             0             0
 node02         0c             0  N/A                   N/A                   AO RDY  500003962c882989              6    12 Gb/S             0             0

Errors:
 -