跳转到主内容

ONTAP 升级后的集群将节点标识为交换机

Views:
1
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
hw<a>2009468002</a>
Last Updated:

适用场景

  • ONTAP 9
  • 无交换机集群
  • AFF 和 FAS 系统

问题描述

  • 在将ONTAP 升级到9.11.1P3后、交换机缺失警报不断填充、CSHM正在交还之前确认节点IP为交换机。
  • SwitchCommunityString_Alert
Cluster::> system health alert show
        Node: node_name
      Alert ID: SwitchCommunityString_Alert
      Severity: Major
             ....
   Probable Cause: Ethernet switch "node-01" with IP address
    "X.X.X.X" is not reachable via SNMP. Incorrect
     SNMP community string might be configured on the
     Ethernet switch.
  Possible Effect: Ethernet switch communication problems and
     accessibility issues.
Corrective Actions: Check the SNMP community string on the Ethernet switch
     to verify that the expected community string is
     configured. Use the "system switch ethernet show
     -snmp-config" command to view the expected community
     string.
 
 
Cluster1::> system health subsystem show
     Subsystem     Health
--------------------------------------------
SAS-connect     ok
Environment     ok
Memory        ok
Service-Processor  ok
Switch-Health    degraded
 
 
  • 然后、通过CDP/ISDP将此交换机发现为管理网络交换机
Cluster1::>system switch ethernet show
Switch             Type                  Address          Model
----------------------------------------------------------------------------------------
ontap.netapp.com  management-network   10.x.x.1      OTHER
           Serial Number: Unknown
            Is Monitored: false
               Reason: MonitoringDisabled by Default
          Software Version: Cisco Nexus OperatingSystem (NX-OS) Software, Version 14.2
           Version Source: CDP/ISDP

 

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.