X1151A端口在ONTAP升级期间挂起

最后更新
另存为PDF

Views:: 15

Visibility:: Public

Votes:: 0

Category:: aff-series

Specialty:: hw

Last Updated:

适用场景

ONTAP 9
AFF A400
X1151A - 2端口100GbE智能IO QSFP28铜缆|操作

问题描述

在极少数情况下、即使网络端口的状态为up、X1151A ionic网络接口卡(NIC)上的端口也可能停止响应：

slot 3: 100G Ethernet Controller IONIC

e3a MAC Address: xx:xx:xx:xx:xx:xx (auto-100g_cr4-fd-up)

QSFP Vendor: Molex

QSFP Part Number: 112-00573

QSFP Serial Number: QSFP_serial_number

e3b MAC Address: xx:xx:xx:xx:xx:xx (auto-100g_cr4-fd-up)

QSFP Vendor: Molex

QSFP Part Number: 112-00573

QSFP Serial Number: QSFP_serial_number

Device Type: ionic

Firmware Version: 1.0.1-E-31

Serial Number: serial_number

节点可能不会使用显示任何集群接口信息 net int show.
Network port show -role cluster 对于 "-" 应已启动的两个接口、显示a。

示例

NodeA::> net int show (network interface show) Logical Status Network Current Current Is Vserver Interface Admin/Oper Address/Mask Node Port Home ----------- ---------- ---------- ------------------ ------------- ------- ---- Node1 Node2_mgmt up/up 10.6.34.54/24 Node1 e0M true

NodeA::> network port show -role cluster Warning: Unable to list entries for vifmgr on node "Node1": RPC: Couldn't make connection [from mgwd on node "Node2" (VSID: -1) to vifmgr at 169.254.212.1]. Node: Node1 Speed(Mbps) Health Port IPspace Broadcast Domain Link MTU Admin/Oper Status --------- ------------ ---------------- ---- ---- ----------- -------- e3a Cluster - - 9000 auto/- - e3b Cluster - - 9000 auto/- - 2 entries were displayed.