跳转到主内容

为什么在使用iSCSI的Windows中MPIO设置、启用路径验证(PVE)设置为0

  1. 最后更新
  2. 另存为PDF
Views:
70
Visibility:
Public
Votes:
0
Category:
data-ontap-dsm-for-windows-mpio
Specialty:
san
Last Updated:

适用场景

  • NetApp ONTAP 9.
  • Microsoft Windows® Server 2016

问题解答

  • 这是一个设置的注册表值，您只需在主机操作系统层设置一个选项即可有效地每 30 秒在所有路径上探测目标。  0表示禁用此功能、1表示启用此功能。 
  • Windows Unified Host Utilities 7.1将设置为0，并 在7.2版中设置为1 (请查看最新文档以了解此中的任何更改。)
    1. HKLM\SYSTEM\CurrentControlSet\Services\mpio\Parameters\PathVerifyEnabled

请在对这些参数进行任何更改之前咨询这些技术支持资源，因为所有供应商不支持的任何配置都可能导致数据访问丢失。

  1. 主机操作系统。
  2. 适用于启动程序的主机总线适配器（ HBA ）供应商和 MPIO 驱动程序文档。
  3. 存储平台最佳实践文档。

追加信息

用于检查 MPIO 的资源
  1. Windows 主机的多路径验证。
  2. 互操作性表工具。
  3. Windows Unified Host Utilities 7.1 。
NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.