无法修改集群交换机运行状况监控以使用SNMPv3

• ONTAP 9
• Cisco 9336集群交换机
• 集群交换机

• 无法修改交换机监控以使用SNMPv3：

netapp01::*> system switch ethernet modify -device netapp-1.netapp.com(xxxxxx) -snmp-version SNMPv3 -community-or-username SNMPv3User

Warning: Settings updated, but the SNMPv3 validation request timed out. Verify that the "-community-or-username" parameter is valid (i.e., the SNMPv3 user exists in ONTAP and on the remote switch). If the
"-community-or-username" parameter is valid, verify that the SNMPv3 user's credentials are the same both in ONTAP as well as in the remote switch. If a custom engine-id was provided for the SNMPv3 user,
ensure it is the same as that of the remote switch.

• 已使用SNMPv2成功监控交换机
• 有关如何配置SNMPv3以进行监控的文档、请参见： 配置SNMPv3