跳转到主内容

在维护模式下、无法将e0c和e0d端口配置为存储

Views:
6
Visibility:
Public
Votes:
0
Category:
aff-series<a>2009年242451</a><a>用于翻译</a>
Specialty:
hw
Last Updated:

适用场景

  • AFF A400
  • 所有ONTAP 版本
  • NS224磁盘架
  • 新安装

问题描述

  • 在维护模式下尝试将端口e0c/e0d设置为存储时、会显示以下错误
*> storage port modify -p e0c -m storage sysctl failed cmd_storage_port_mode_storage 8238. Return code = 2 *> storage port modify -p e0d -m storage sysctl failed cmd_storage_port_mode_storage 8238. Return code = 2
  • 端口不会更改模式
*> storage port show Port Type Mode Speed(Gb/s) State Status VLAN ID ---- ---- ------- ----------- -------- ------- ------- e0c ENET network - - - 0 e0d ENET network - - - 0

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.