跳转到主内容

在硬件组件出现故障的 boot_recovery 过程后,系统无法启动

Views:
49
Visibility:
Public
Votes:
0
Category:
fas-systems
Specialty:
hw
Last Updated:

适用场景

  • AFF 型号
  • FAS 型号
  • ONTAP 9

问题描述

  • 尝试使用 boot_recovery 命令恢复节点:

LOADER-A> boot_recovery 991P4_q_image.tgz
Downloading 991P4_q_image.tgz ..

  • 恢复无法写入启动设备:

Install Validation Failed.
diskinfo: /dev/ada0: No such file or directory
ERROR: Unable to read diskinfo from device /dev/ada0.
Checking network link... umount: /mnt: not a file system root directory

  • 恢复过程将提示重新启动:

The node must be rebooted to start using the newly installed software. Do you
want to reboot now? {y|n} y

  • 控制器无法启动:

Can't find backup boot device u0a.1                        
ACPI RSDP Found at 0x6c9ed000                           
NVMe not present!                                 
PCI device check failed                              
ERROR: Platform verification failed. Autoboot will be disabled.          
LOADER-A>

 

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.