由于 SNMP 设置无效，因此不监控集群交换机

适用场景

• ONTAP 9
• 集群网络交换机
• 集群交换机运行状况监控(CSHM)

问题描述

• 集群交换机管理IP地址正在对集群的ping操作做出响应
• cshm1! SNMP社区字符串已按预期通过RCF)在交换机上配置
• 但是、集群交换机运行状况监控器会显示以下输出：

::> system cluster-switch show
Switch              Type              Address          Model
--------------------------- ------------------ ---------------- ---------------
sw1(FOC1XXXX678)    cluster-network    10.10.10.10      OTHER
     Serial Number: Unknown
     Is Monitored: false
            Reason: Invalid SNMP Settings
  Software Version: Cisco Nexus Operating System (NX-OS) Software, Version 9.3(4)
    Version Source: CDP

sw2(FOC1XXXX679)     cluster-network    10.10.10.10      OTHER
     Serial Number: Unknown
     Is Monitored: false
           Reason: Invalid SNMP Settings
  Software Version: Cisco Nexus Operating System (NX-OS) Software, Version 9.3(4)
    Version Source: CDP

• 尝试从监控中删除交换机并重新添加交换机失败、并显示以下错误：

::> system cluster-switch create -device cluster-switch2 -address 184.X.XX.XX -snmp-version SNMPv2c -community cshm1! -model OTHER -type cluster-network -is-monitoring-enabled-admin true

Error: SNMP validation request timed out. Verify that the "-community-or-username" value is valid.