跳转到主内容

新推出后,与 SP 或 BMC 的 SSH 连接被拒绝 控制器

Views:
105
Visibility:
Public
Votes:
0
Category:
aff-series
Specialty:
hw
Last Updated:

适用场景

  • AFF 型号
  • FAS 型号
  • ONTAP 9
  • 服务处理器 (SP)
  • 底板管理控制器( BMC )
  • BIOS

问题描述

方案
  • 在启动到 ONTAP 之前新安装的系统
  • 在启动到 ONTAP 之前更换了主板
  • 在 SP 或 BMC 上执行 Wipeclean
症状
如果尝试通过 SSH 连接到方案列表下的控制器的 SP/BMC IP 地址,则会导致以下结果:
 
ssh -l admin 10.10.10.10
ssh: connect to host 10.10.10.10 port 22: Connection refused
 
如果在尝试 SSH 的同时连接到控制器的串行控制台,则输出中将显示与以下内容类似的错误:
 
[200912345678][123:456:easyinitd][WARN][easyinitd_wdt.c:monitor_service:119]sshd is not started yet, might still generate keys
sh: can't kill pid 11111: No such process
network: Secure Port is enabled for [ssh] with 22
Unable to load host key "/etc/ssh/ssh_host_rsa_key": invalid format
Unable to load host key "/etc/ssh/ssh_host_rsa_key": invalid format
Unable to load host key: /etc/ssh/ssh_host_rsa_key
Unable to load host key "/etc/ssh/ssh_host_dsa_key": invalid format
Unable to load host key "/etc/ssh/ssh_host_dsa_key": invalid format
Unable to load host key: /etc/ssh/ssh_host_dsa_key
Unable to load host key "/etc/ssh/ssh_host_ecdsa_256_key": invalid format
Unable to load host key "/etc/ssh/ssh_host_ecdsa_256_key": invalid format
Unable to load host key: /etc/ssh/ssh_host_ecdsa_256_key
Unable to load host key "/etc/ssh/ssh_host_ecdsa_384_key": invalid format
Unable to load host key "/etc/ssh/ssh_host_ecdsa_384_key": invalid format
Unable to load host key: /etc/ssh/ssh_host_ecdsa_384_key
Unable to load host key "/etc/ssh/ssh_host_ecdsa_521_key": invalid format
Unable to load host key "/etc/ssh/ssh_host_ecdsa_521_key": invalid format
Unable to load host key: /etc/ssh/ssh_host_ecdsa_521_key
sshd: no hostkeys available -- exiting.
 
在尝试连接期间, SecureCRT 等应用程序可能会报告以下情况: 
 [LOCAL] : RECV: SERVICE_ACCEPT[ssh-userauth] -- OK [LOCAL] : SENT : USERAUTH_REQUEST [none] [LOCAL] : [LOCAL] : RECV: TCP/IP close [LOCAL] : Changing state from STATE_CONNECTION to STATE_CLOSED [LOCAL] : Connected for 5 seconds, 1586 bytes sent, 1079 bytes received [LOCAL] : Stream has closed [CLOSE_TYPE_NONSPECIFIC] : The operation completed successfully. 

 

 

 

 
 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.