跳转到主内容

使用 SP 固件 5.8 的 FAS8200/A300 上的 SPLinkDownAlert

Views:
40
Visibility:
Public
Votes:
0
Category:
fas-systems
Specialty:
hw
Last Updated:

适用场景

  • FAS8200
  • AFF A300
  • 服务处理器( SP )固件版本: 5.8
  • SP 内部交换机版本: Version16-SB_XXII-ETHSW-RZL

问题描述

  • 系统报告 SPLinkDownAlert 消息:

示例:

Mon May 24 05:19:47 CST [Hostname: nphmd: hm.alert.raised:alert]: Alert Id = SPLinkDownAlert, Alerting Resource = SP Config raised by monitor controller

  • E0M 链路已启动, SP 处于联机状态,而 sysconfig -a 中没有 IP 地址:

示例:

Service Processor           Status: Online
 Firmware Version:   5.8
  Mgmt MAC Address:  
  Ethernet Link:     down, full duplex, auto-neg complete
  Using DHCP:         no
 IPv4 configuration:
  IP Address:         unknown
  Netmask:            unknown
  Gateway:            unknown
 IPv6 configuration:         Disabled

slot 0: Gigabit Ethernet I210
  e0M MAC Address:    (auto-1000t-fd-up)
  Device Type:        1533
  Firmware Version:   3.25-5.5 0x80000674

  • SP 内部交换机版本为 16-SB_XXII-ETHSW-RZL 。

"sp-latest-configuration" 中的示例:

Check revision of programmable devices with revision of images bundled in SP (/usr/local/bin/check_fw_revision.sh)
==================================================
Versions that do not match will be printed.
==================================================
Ethernet switch version
==================================================
Version16 SB_XXII ETHSW RZL

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.