跳转到主内容

sldiag测试报告"端口e2a或e2b链路可能已关闭"

Views:
25
Visibility:
Public
Votes:
0
Category:
fas-systems
Specialty:
hw
Last Updated:

状态信息

适用场景

  • FAS8200
  • ONTAP 9.6P3

问题描述

  • 执行""时sldiag device run、E2A和e2b端口 ERROR在状态中报告为""。

示例:

*> sldiag device status

Device TestName StartDate EndDate Status LOOP
---------- ---------------- ------------------- ------------------- ---------- --------
nvmem NVMEM details Tue Mar 3 08:24:08 Tue Mar 3 08:24:08 PASSED 1/1
...
e2a NIC Packet Test Tue Mar 3 08:24:40 Tue Mar 3 08:27:04 ERROR 1/1
e2b NIC Packet Test Tue Mar 3 08:25:02 Tue Mar 3 08:27:04 ERROR 1/1
e2c NIC Packet Test Tue Mar 3 08:25:24 Tue Mar 3 08:27:46 PASSED 1/1
e2d NIC Packet Test Tue Mar 3 08:25:47 Tue Mar 3 08:28:18 PASSED 1/1

  • port e2a or e2b link may be down报告""。

示例:

 *> sldiag device status -long -state failed TEST START ------------------------------------------ DEVTYPE: nic NAME: NIC Packet Test START DATE: Tue Mar 3 08:24:17 GMT 2020 STATUS: Aborted STARTING: NIC Packet Test port e2a or e2b link may be down Interface: e2a NIC Packet Test END DATE: Tue Mar 3 08:27:48 GMT 2020 LOOP: 1/1 TEST END -------------------------------------------- 
  • sysconfig -a""将""显示UP为e2a和e2b端口。

示例:

 slot 2: Quad Gigabit Ethernet Controller 82580 e2a MAC Address: 90:e2:ba:fb:8a:94 (auto-1000t-fd-up) e2b MAC Address: 90:e2:ba:fb:8a:95 (auto-1000t-fd-up) e2c MAC Address: 90:e2:ba:fb:8a:96 (auto-1000t-fd-up) e2d MAC Address: 90:e2:ba:fb:8a:97 (auto-1000t-fd-up) Device Type: 150E, PBA E68891-020 Firmware Version: 3.1d 0x80000271 Serial Number: 90E2BAFB8A94 

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.