跳转到主内容

发生网络结构事件后、远程磁盘缺少某些路径

Views:
3
Visibility:
Public
Votes:
0
Category:
fabric-interconnect-and-management-switches<a>2009631593</a>
Specialty:
HW
Last Updated:

适用场景

  • Fabric MetroCluster
  • Cisco MDS交换机

问题描述

  • 发生网络结构事件后、尽管链路已启动且正常运行、但某些远程磁盘仍会丢失8条预期路径中的4条路径:

storage array disk paths show -disk 1.1.1
Disk Name: 1.1.1
UID:
AAAAAAA:BBBBB:00000000:00000000:00000000:00000000:00000000:00000000:00000000:00000000
LUN
Link Disk I/O
Controller Initiator ID Acc Use
Target Port TPGN Speed (KB/s) IOPS
node1 2c 1019 AO INU 2200001086acbb40
1 16 Gb/S 0 0
node1 2a 1019 AO RDY 2100001086acbb40 0
16 Gb/S 0 0
node2 2c 1019 AO RDY 2200001086acbb40 1 16 Gb/S
0 0
node2 2a 1019 AO INU 2100001086acbb40 0 16 Gb/S 124
0

  • 请注意、上述输出中缺少11a和11c上的路径。
  • 不受影响的磁盘会显示正确的路径数:

storage array disk paths show -disk 2.2.1
Disk Name: 2.2.1
UID: CCCCCCC:DDDDDDD:00000000:00000000:00000000:00000000:00000000:00000000:00000000:00000000
LUN Target Side Initiator Side Link Disk I/O
Controller Initiator ID Acc Use Target Port Switch Port Switch Port TPGN Speed (KB/s) IOPS
node1 2c 14 AO RDY 2200001086ab5d80 sw2:1-14 sw2:1-2 30 16 Gb/S 0 0
node1 11c 14 AO RDY 2200001086ab5d40 sw2:1-15 sw2:1-3 26 16 Gb/S 0 0
node1 2a 14 AO RDY 2100001086ab5d80 sw1:1-14 sw1:1-2 29 16 Gb/S 0 0
node1 11a 14 AO INU 2100001086ab5d40 sw1:1-15 sw1:1-3 25 16 Gb/S 0 0
node2 2c 14 AO INU 2200001086ab5d80 sw2:1-14 sw2:1-5 30 16 Gb/S 0 0
node2 11c 14 AO RDY 2200001086ab5d40 sw2:1-15 sw2:1-6 26 16 Gb/S 0 0
node2 2a 14 AO RDY 2100001086ab5d80 sw1:1-14 sw1:1-5 29 16 Gb/S 0 0
node2 11a 14 AO RDY 2100001086ab5d40 sw1:1-15 sw1:1-6 25 16 Gb/S 0 0

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.