跳转到主内容

ONTAP升级后端口e0d关闭

Views:
4
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
hw<a>2009922787</a>
Last Updated:

适用场景

  • AF/FAS/ASA
  • ONTAP 9.  
  • ONTAP 升级

问题描述

  • 升级ONTAP后、e0d已关闭、e0c已启动、但未显示QSFP详细 信息。

|| ONTAP升级前||

slot 0: Dual 40G/100G Ethernet Controller CX5
e0c MAC Address:   d0:xx:xx:xx:xx:xb (auto-100g_sr4-fd-up)
e0d MAC Address:   d0:xx:xx:xx:xx:xc (auto-100g_sr4-fd-up)
||在ONATp升级后||
 
slot 0: Dual 40G/100G Ethernet Controller CX5
e0c MAC Address:   d0:xx:xx:xx:xx:xb (auto-100g_sr4-fd-up)
e0d MAC Address:   d0:xx:xx:xx:xx:xc (auto-unknown-fd-down)
  • dmesg日志:
[1389] e0d: WARN: wait_func:993:(pid 31917): ACCESS_REG(0x805) timeout. Will cause a leak of a command resource
[1389] e0d: WARN: mlx5_fwdump:191:(pid 31917): Issuing FW dump
[1390] e0d: ERR: mlx5_cmd_check:721:(pid 0): QUERY_CONG_STATISTICS(0x826) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0x6c4d48)
[1391] e0d: ERR: mlx5e_ioctl:4734:(pid 31917): Query eeprom failed, eeprom reading is not supported
[1391] e0d: ERR: mlx5_cmd_check:721:(pid 0): QUERY_Q_COUNTER(0x773) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0x6c4d48)
[1391] e0d: ERR: mlx5_cmd_check:721:(pid 0): QUERY_VPORT_COUNTER(0x770) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0x6c4d48)
[1391] e0d: ERR: mlx5_cmd_check:721:(pid 0): ACCESS_REG(0x805) op_mod(0x1) failed, status bad operation(0x2), syndrome (0x3590f5)
[1664] e0c: WARN: wait_func:993:(pid 37921): ACCESS_REG(0x805) timeout. Will cause a leak of a command resource
[1664] e0c: WARN: mlx5_fwdump:191:(pid 37921): Issuing FW dump
[1664] e0c: ERR: mlx5_cmd_check:721:(pid 0): QUERY_CONG_STATISTICS(0x826) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0x6c4d48)
[1665] e0c: ERR: mlx5_cmd_check:721:(pid 0): QUERY_CONG_STATISTICS(0x826) op_mod(0x0) failed, status bad operation(0x2), syndrome (0x3590f5)
[1666] e0c: ERR: mlx5e_ioctl:4734:(pid 37921): Query eeprom failed, eeprom reading is not supported
 
[102] e0c: Unable to read the eeprom info error = 0xffffffc4
[104] e0d: WARN: mlx5_fwdump:191:(pid 0): Issuing FW dump
[105] Jan 23 04:13:02 [scc143n08a:net.ifgrp.lacp.link.active:notice]: ifgrp a0a, port e0c has transitioned to the active state.
[106] e0d: Unable to read the eeprom info error = 0xffffffc4
 
  • 重新拔插电缆、SFP未解决此问题。
  • 尝试退回受影响的端口、但问题描述保持不变。

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.

 

  • 这篇文章对您有帮助吗?