温度过高会导致磁盘架故障警报
适用场景
- AFF / ASA / FAS
- DS2246
- ONTAP 9
问题描述
EMS log
显示SHELF_FAULT
错误:
[FAS-01: dsa_worker0: ses.status.temperatureWarning:alert]: DS2246 (S/N XXXXXXXXXXX) shelf 5 on channel 0b temperature warning for Temperature sensor 6: non-critical status; overtemperature warning. Current temperature: 66 C (150 F). This module is on the rear of the shelf on the lower right power supply.
[FAS-01: statd: monitor.shelf.warning:error]: Fault reported on disk storage shelf attached to channel 0b. Check fans, power supplies, disks, and temperature sensors.
[FAS-01: statd: callhome.shlf.fault:error]: Call home for SHELF_FAULT
STORAGE-FAULT
ASUP日志:
Enclosure Status: non-critical
Channel: 0b
Shelf: 5
Shelf Type: DS2246
...
Temperature Sensors:
Element Status Status Bytes Status Descriptions
1: OK 01,00,36,00
2: OK 01,00,3A,00
3: OK 01,00,3D,00
4: OK 01,00,53,00
5: OK 01,00,3C,00
6: NONCRITICAL 03,00,56,04 OT WARNING
7: OK 01,00,3E,00
8: OK 01,00,3F,00
ENVIRONMENT
ASUP日志:
安装了温度传感器的元件列表:1、2、3、4、5、6、7、8;错误 :6
主机架温度:
[1] 34 C (93 F)(环境 )正常温度范围[2] 38
C (100 F)正常温度范围[3] 41 C (105
F) 正常温度范围[4] 63 C (145 F)正常温度范围-------温度传感器温度范围中的104- (104
F- 104-)温度范围
中的温度传感器
------------> PSU2中的传感器
[7]41 C (105 F) 正常温度范围[8]42 C (107 F)正常温度范围
- DC环境中没有过温。
- 磁盘架固件已升级到最新版本。