跳转到主内容

ONTAP 升级会每隔一天显示一次 splog.warnings 消息

Views:
2
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
hw
Last Updated:

适用于

  • NetApp AFF A300
  • ONTAP 升级(9.13.1P7 到 9.14.1P12)
  • Service Processor(SP)

问题

  • 在将 ONTAP 从版本 9.13.1P7 升级到 9.14.1P12 后,EMS log 每隔一天出现 splog.warnings 消息:

Thu Nov 27 05:30:00 +0900 [node-01: splog_main: splog_warnings_1:error]: params: {'sp_type': 'SP', 'reason': 'splogd is running in degraded mode and having difficulty getting splogs from the SP FW'}

Fri Nov 28 05:30:00 +0900 [node-01: splog_main: splog_warnings_1:error]: params: {'sp_type': 'SP', 'reason': 'splogd is running in degraded mode and having difficulty getting splogs from the SP FW'}

Sat Nov 29 05:30:00 +0900 [node-01: splog_main: splog_warnings_1:error]: params: {'sp_type': 'SP', 'reason': 'splogd is running in degraded mode and having difficulty getting splogs from the SP FW'}

  • sysconfig -a 输出指示 SP 状态为 online,并且 IP 地址显示正确:

Service Processor       Status: Online
Firmware Version:       5.11P3
Mgmt MAC Address:       D0:XX:EA:XX:0F:BX
Ethernet Link:        up, full duplex, auto-neg complete
Using DHCP:          no
IPv4 configuration:
   IP Address:        10.XX.XXX.26
   Netmask:         255.255.255.0
   Gateway:         10.XX.XXX.1
IPv6 configuration:      Disabled

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.