跳转到主内容

由于 PCIe 模块问题,启动时节点电源循环

Views:
1
Visibility:
Public
Votes:
0
Category:
fas-systems
Specialty:
HW
Last Updated:

适用于

  • AFF-A70
  • X50133A

问题

  • 节点在启动 ONTAP 时重新启动,出现以下错误:

e3b: port_rcv_data failed.
e3c: port_rcv_data failed.
e3d: port_rcv_data failed.
e3a: port_rcv_data failed.
e3b: port_rcv_data failed.
e3c: port_rcv_data failed.
e3d: port_rcv_data failed.
e3a: port_rcv_data failed.
e3a: ERR: NTAP_power_cycle_after_firmware_dump: fatal error occured with firmware dump collected and will power-cycle to recover...

e3a: ERR: mlx5e_open_locked:4358:(pid 4954): mlx5e_open_tises failed, -5
e3b: ERR: mlx5e_open_locked:4358:(pid 4954): mlx5e_open_tises failed, -5
e3c: ERR: mlx5e_open_locked:4358:(pid 4954): mlx5e_open_tises failed, -5
e3d: ERR: mlx5e_open_locked:4358:(pid 4954): mlx5e_open_tises failed, -5
e3a: ERR: mlx5e_media_change:772:(pid 4954): Query port media capability failed
e3a: ERR: mlx5e_media_change:772:(pid 4954): Query port media capability failed
e3a: ERR: mlx5e_media_change:772:(pid 4954): Query port media capability failed
e3a: ERR: mlx5e_open:4421:(pid 4954): Setting port status to up failed
e3a: ERR: mlx5e_open_locked:4358:(pid 4954): mlx5e_open_tises failed, -5
e3b: ERR: mlx5e_ioctl:4994:(pid 34434): Query module num failed, eeprom reading is not supported
e3c: ERR: mlx5e_ioctl:4994:(pid 34434): Query module num failed, eeprom reading is not supported
e3d: ERR: mlx5e_ioctl:4994:(pid 34434): Query module num failed, eeprom reading is not supported
e3a: ERR: mlx5e_ioctl:4994:(pid 34438): Query module num failed, eeprom reading is not supported
e3b: ERR: mlx5e_ioctl:4994:(pid 39252): Query module num failed, eeprom reading is not supported
e3c: ERR: mlx5e_ioctl:4994:(pid 39252): Query module num failed, eeprom reading is not supported
e3d: ERR: mlx5e_ioctl:4994:(pid 39252): Query module num failed, eeprom reading is not supported
e3a: ERR: mlx5e_ioctl:4994:(pid 39256): Query module num failed, eeprom reading is not supported
e3d: ERR: NTAP_power_cycle_after_firmware_dump: fatal error occured with firmware dump collected and will power-cycle to recover...

  • 重新启动电源并启动 ONTAP 后,插槽 3 上的所有端口将不会联机。

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.