跳转到主内容

节点无法启动、并显示"BMC IPMI communication failed (BMC IPMI通信失败)"错误

Views:
32
Visibility:
Public
Votes:
0
Category:
aff-series<a>2009877221</a>
Specialty:
hw
Last Updated:

适用场景

AF-A700S

问题描述

  • 更换主板后、节点无法启动、并显示"BMC IPMI communication failed (BMC IPMI通信失败)"错误。

Failed to write to KCS device
BMC IPMI communication failed
ERROR: Platform verification failed. Autoboot will be disabled.
Failed to write to KCS device
Failed to write to KCS device
Failed to write to KCS device
Failed to write to KCS device
Failed to write to KCS device
Failed to write to KCS device
Failed to get DHCP setting: Unknown IPMI completion code.
Failed to read to KCS device
Failed to get address: Unknown IPMI completion code.
Failed to set DHCP setting: Node busy.
Unable to disable DHCP on BMC internal LAN
Failed to set address: Node busy.
Failed to set BMC_A internal IP to 192.0.2.81
ERROR: Platform initialization failed. Autoboot will be disabled.

  • 重新拔插主板后、系统通过控制台无响应。
  • 再次更换主板不能解决问题。

 

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.