节点无法启动、并检测到BIOS POST故障。中止自动启动"

最后更新
另存为PDF

Views:: 81

Visibility:: Public

Votes:: 0

Category:: fas-systems

Specialty:: hw

Last Updated:

适用场景

FAS / AFF平台

问题描述

节点无法启动、并显示以下输出

System BIOS shadowed USB 2.0: MICRON eUSB DISK BIOS is scanning PCI Option ROMs, this may take a few seconds... WARNING 02A1: SP Not Found ERROR No Response to Controller FRU ID Read Request via IPMI ERROR No Response to Midplane FRU ID Read Request via IPMI Boot Loader version 4.3 Copyright (C) 2000-2003 Broadcom Corporation. Portions Copyright (C) 2002-2014 NetApp, Inc. All Rights Reserved.CPU Type: Intel(R) Xeon(R) CPU C3528 @ 1.73GHz BIOS POST Failure(s) detected. Abort AUTOBOOT LOADER>

或

正在初始化系统内存...

Loading Device Drivers ... Waiting for SP ... SP failure. Resetting SP from primary FW. This can take a few minutes Waiting for SP ... SP failure. Resetting SP from backup FW. This can take a few minutes Waiting for SP ... Failed to recover SP IPMI:Get controller FRU inventory:failed Configuring Devices ... IPMI PCI Slot Control failed.

CPU = 1 Processor(s) Detected. Intel(R) Xeon(R) CPU D-1528 @ 1.90GHz (CPU 0) CPUID: 0x00050663. Cores per Processor = 6 32768 MB System RAM Installed. SATA (AHCI) Device: SV9MST6D120GLM41NP

BIOS POST Failure(s) detected: SP IPMI failure. Abort AUTOBOOT

重新拔插主板未解决问题描述问题