跳转到主内容

由于控制台中有缆线、节点未启动、并显示消息uart0:console (115200、n、8、1)

Views:
8
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
hw<a>2009761876.</a>
Last Updated:

适用场景

  • ONTAP 9
  • 控制台端口
  • 节点启动过程

问题描述

节点似乎正在正确启动、然后突然在uart0:console处挂起。

控制台日志

Port80 port80_identify. ipmi0: <IPMI System Interface> on isa0 ipmi0: BT mode found at io 0xe4 alignment 0x1 on isa ipmi1: <IPMI System Interface> on isa0 ipmi1: KCS mode found at io 0xca2 alignment 0x1 on isa bbsp0: <Bios/BMC Status Port> on isa0 ICHXX GPIO0: <ICH LPC VGPIO> on isa0 isab0: [GIANT-LOCKED] Port80 port80_probe. port800: <SP Port 80 Status Port> on isa0 Port80 device driver attached. uart0: <16550 or compatible> at port 0x3f8 irq 4 flags 0x40 on isa0 uart0: console (115200,n,8,1)
  • 重新启动或重新拔插主板没有帮助。

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.