跳转到主内容

网络端口关闭、QSFP报告无接收器电源

Views:
8
Visibility:
Public
Votes:
0
Category:
aff-series<a>2009年496725</a>
Specialty:
hw
Last Updated:

适用场景

  • ONTAP 9
  • XL710以太网端口、硬件组件:
    • X91440A NIC
    • X1144A NIC
    • X1147A NIC
    • AFF A700s板载以太网端口

问题描述

  • 网络端口已关闭

slot 8: 10/40 Gigabit Ethernet Controller XL710 QSFP+      
e8e MAC Address:    d0:39:ea:4b:67:72 (auto-unknown-fd-down)         
QSFP Vendor:                 
QSFP Part Number:            
QSFP Serial Number:        
Device Type:        XL710 B1      
Firmware Version:   fw 5.20 nvm 5.05 etid 80008d4d      
Part Number:        111-02590      
Hardware Revision:  B0      
Serial Number:      032139001292

  • AutoSupport文件 ifconfig-vvvm 显示QSFP:

e8e: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 9000
lane 1: RX: 0.00 mW (-24.32 dBm) TX: 0.38 mW (-4.18 dBm)
lane 2: RX: 0.00 mW (-40.00 dBm) TX: 0.38 mW (-4.18 dBm)
lane 3: RX: 0.00 mW (-40.00 dBm) TX: 0.38 mW (-4.11 dBm)
lane 4: RX: 0.00 mW (-21.80 dBm) TX: 0.41 mW (-3.87 dBm)

  • 已确认电缆两端均已连接

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.