插槽11中的NVDIMM失败、并在节点启动时显示错误nvdimm.nvmem.initfault:FAULT"

最后更新
另存为PDF

Views:: 11

Visibility:: Public

Votes:: 0

Category:: fas-systems<a>2009年362148</a>

Specialty:: hw

Last Updated:

适用场景

AFF A400
AFF A800
FAS 8300
FAS 8700
ONTAP 9

问题描述

节点无法启动、并显示以下错误：在ONTAP 升级过程中重新启动节点后、出现崩溃

[nvdimm.nvmem.initfail:FAULT]:NVMEM subsystem initialization failed because NVDIMM device in slot-11

failed to configure energy source

********************************************************************** NVMEM subsystem failed initialization or configuration check To prevent NVMEM data loss, halt the system. Set bootarg.init.battery_override can ignore this error and continue to boot. ********************************************************************** PANIC : System is going to shutdown because NVMEM subsystem failed initialization or configuration check. version: 9.10.1P4: Mon May 9 18:11:44 EDT 2022

IPMI device unit 1 rev. 1, firmware rev. 10.03, version 2.0, device support mask oxbf

Sun Mar 5 08:05:02 2023 [nvdimm.nvmem.initfail:FAULT]:NVMEM subsystem initialization failed because NVDIMM device in slot-11 lost persistence due to SDRAM not in self-refresh mode , andNVDIMM HARDWARE error.. To prevent NVMEM data loss, halt the system. Sun Mar 5 08:05:02 2023 [nvdimm.nvmem.initfail:FAULT]:NVMEM subsystem initialization failed because NVDIMM device in slot-23 lost persistence due to SDRAM not in self-refresh mode , andNVDIMM HARDWARE error.. To prevent NVMEM data loss, halt the system. Sun Mar 5 08:05:02 2023 [nvdimm.nvmem.destage.failure:ALERT]:NVMEM subsystem failed to copy nonvolatile data to flash memory on NVDIMM device because SDRAM is not in self-refresh mode, and because of a hardware error..