跳转到主内容

SFPの不良が原因のNAS読み取り遅延

Views:
1
Visibility:
Public
Votes:
0
Category:
fas-systems<a>2009817705</a>
Specialty:
hw
Last Updated:

環境

ONTAP 9

問題

  • NAS共有で読み取りパフォーマンスの低下が報告される
  • LIFをホストするコントローラポートに接続されたスイッチポートでCRCエラーが報告される
Ethernet1/40 is up admin state is up, Dedicated Interface Hardware: 1000/10000/25000 Ethernet, address: 748f.c20e.54b7 (bia 748f.c20e.54b7) Description: itsgbslnasc01n1 MTU 9216 bytes, BW 10000000 Kbit , DLY 10 usec reliability 253/255, txload 1/255, rxload 1/255 Encapsulation ARPA, medium is broadcast Port mode is access full-duplex, 10 Gb/s, media type is 10G Beacon is turned off Auto-Negotiation is turned on FEC mode is Auto Input flow-control is off, output flow-control is off Auto-mdix is turned off Rate mode is dedicated Switchport monitor is off EtherType is 0x8100 EEE (efficient-ethernet) : n/a admin fec state is auto, oper fec state is off Last link flapped 1week(s) 4day(s) Last clearing of "show interface" counters never 4 interface resets Load-Interval #1: 30 seconds 30 seconds input rate 11320 bits/sec, 1 packets/sec 30 seconds output rate 29768 bits/sec, 7 packets/sec input rate 11.32 Kbps, 1 pps; output rate 29.77 Kbps, 7 pps Load-Interval #2: 5 minute (300 seconds) 300 seconds input rate 6448 bits/sec, 3 packets/sec 300 seconds output rate 17896 bits/sec, 5 packets/sec input rate 6.45 Kbps, 3 pps; output rate 17.90 Kbps, 5 pps RX 179794285 unicast packets 180564 multicast packets 243884 broadcast packets 180218733 input packets 149626636212 bytes 0 jumbo packets 0 storm suppression packets 127 runts 0 giants 3426004 CRC 0 no buffer 3426311 input error 0 short frame 0 overrun 0 underrun 0 ignored 0 watchdog 0 bad etype drop 0 bad proto drop 0 if down drop 0 input with dribble 0 input discard 0 Rx pause TX 150701546 unicast packets 10728108 multicast packets 5426639 broadcast packets 166856293 output packets 62138770021 bytes 0 jumbo packets 0 output error 0 collision 0 deferred 0 late collision 0 lost carrier 0 no carrier 0 babble 1889662 output discard 0 Tx pause

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.