AFF A700s 上的 MPB1 传感器出现故障

最后更新
另存为PDF

Views:: 9

Visibility:: Public

Votes:: 0

Category:: aff-series<a>BMC</a><a>A700s</a><a>2008576894</a><a>MPB1 传感器</a><a>BURT 1359233</a>

Specialty:: hw

Last Updated:

适用场景

AFF A700

问题描述

EMS 错误消息示例：

Fri Jul 30 15:33:01 +0200 [node_name: env_mgr: monitor.temp.unreadable:error]: The controller temperature (MPB1 LTemp1) is not readable. Fri Jul 30 15:33:01 +0200 [node_name: env_mgr: monitor.temp.unreadable:error]: The controller temperature (MPB1 RTemp1) is not readable. Fri Jul 30 15:33:01 +0200 [node_name: env_mgr: monitor.temp.unreadable:error]: The controller temperature (MPB1 LTemp2) is not readable. Fri Jul 30 15:33:01 +0200 [node_name: env_mgr: monitor.temp.unreadable:error]: The controller temperature (MPB1 RTemp2) is not readable. Fri Jul 30 15:33:01 +0200 [node_name: env_mgr: monitor.temp.unreadable:error]: The controller temperature (MPB1 LTemp3) is not readable. Fri Jul 30 15:33:31 +0200 [node_name: env_mgr: callhome.chassis.hitemp:error]: Call home for CHASSIS OVER TEMPERATURE Fri Jul 30 15:34:00 +0200 [node_name: monitor: monitor.globalStatus.critical:EMERGENCY]: Chassis temperature is too high.. Fri Jul 30 15:34:01 +0200 [node_name: env_mgr: monitor.temp.unreadable:error]: The controller temperature (MPB1 RTemp3) is not readable. Fri Jul 30 15:34:01 +0200 [node_name: env_mgr: monitor.temp.unreadable:error]: The controller temperature (MPB1 LTemp4) is not readable. Fri Jul 30 15:34:01 +0200 [node_name: env_mgr: monitor.temp.unreadable:error]: The controller temperature (MPB1 RTemp4) is not readable. Fri Jul 30 15:34:01 +0200 [node_name: env_mgr: monitor.temp.unreadable:error]: The controller temperature (BridgeB1 LTemp) is not readable. Fri Jul 30 15:34:01 +0200 [node_name: env_mgr: monitor.temp.unreadable:error]: The controller temperature (BridgeB1 RTemp) is not readable. Fri Jul 30 16:33:01 +0200 [node_name: env_mgr: monitor.temp.unreadable:error]: The controller temperature (MPB1 LTemp1) is not readable. Fri Jul 30 16:33:01 +0200 [node_name: env_mgr: monitor.temp.unreadable:error]: The controller temperature (MPB1 RTemp1) is not readable. Fri Jul 30 16:33:01 +0200 [node_name: env_mgr: monitor.temp.unreadable:error]: The controller temperature (MPB1 LTemp2) is not readable. Fri Jul 30 16:33:01 +0200 [node_name: env_mgr: monitor.temp.unreadable:error]: The controller temperature (MPB1 RTemp2) is not readable. Fri Jul 30 16:33:01 +0200 [node_name: env_mgr: monitor.temp.unreadable:error]: The controller temperature (MPB1 LTemp3) is not readable. Fri Jul 30 16:33:31 +0200 [node_name: env_mgr: callhome.chassis.hitemp:error]: Call home for CHASSIS OVER TEMPERATURE ... (repeated hourly)

HA 对中每个节点的以下传感器均显示为发生故障：

::> system node run -node * -command environment status
 2 entries were acted on.
 
 Node: netapp-a700s-1
 Sensor Name              State          Current  Critical     Warning     Warning    Critical
 Reading       Low         Low         High    High
 ---------------------------------------------------------------------------------------------------
 MPB1 LTemp4             failed            -- C         0 C         5 C        55 C        60 C
 MPB1 RTemp4             failed            -- C         0 C         5 C        55 C        60 C
 
 
 Node: netapp-a700s-2
 Sensor Name              State          Current    Critical     Warning  Warning    Critical
 Reading       Low         Low         High High
 -------------------------------------------------------------------------------------------------
 MPB1 LTemp4             failed            -- C         0 C        5 C        55 C        60 C
 MPB1 RTemp4             failed            -- C         0 C        5 C        55 C        60 C

未报告其他温度传感器问题