LIF 不适用于板载 CNA 网络接口

• SnapMirror传输 可能会失败 、并显示错误、如所述 snapmirror show -fields state, status, health, last-transfer-error

Error: command failed: Failed to get information for source volume "volume_node_name:volume_name" for confirmation. (CSM: A get-session operation failed because no (local) transport address was registered for the node.)

• EMS会记录过渡到非活动状态的端口。示例：

[node-name: intr: net.ifgrp.lacp.link.inactive:error]: ifgrp a0a, port e0g has transitioned to an inactive state. The interface group is in a degraded state.
[node_name: intr: net.ifgrp.lacp.link.inactive:error]: ifgrp a0a, port e0e has transitioned to an inactive state. The interface group is in a degraded state.

• 如果受影响的端口上存在集群间生命周期、 cluster peer ping 则无法访问。
• LIF运行状态为"已关闭"。示例：

::> network interface show -role intercluster
       Logical   Status    Network       Current     Current Is
Vserver    Interface  Admin/Oper Address/Mask     Node      Port   Home
----------- ---------- ---------- ------------------ ------------- ------- ----
VServer
      [...]
      lif-intc   up/down   x.x.x.x/x      node-name    a0a-11 true

• ifconfig -vvv 输出中未收到但发送LACPDU。示例：

a0a: flags=8888<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 9000
   ...
   laggport: e0g flags=22222<DEFAULT> state=45<ACTIVITY,AGGREGATION,DEFAULTED>
      ...
       input/output LACPDUs: 0 / 123456