跳转到主内容

在VLAN标记时、LIF无法ping或被Ping

Views:
Visibility:
Internal
Votes:
0
Category:
ontap-9
Specialty:
nas<a>2009411582</a>
Last Updated:

适用场景

ONTAP 9

问题描述

此时将创建一个新的LIF、但无法从所有节点执行Pinging:
 
Cluster1::> net int show -address 10.17.124.137
 
(network interface show)
 
Logical   Status   Network       Current    Current Is
Vserver   Interface  Admin/Oper Address/Mask    Node      Port   Home
----------- ---------- ---------- ------------------ ------------- ------- ----
vserver32
lif2 up/up   10.17.124.137/24  Node7  a1b-124 true
 
Cluster1::> network ping -node Node7 -vserver vserver32 -destination 10.17.124.137
10.17.124.137 is alive
 
Cluster1::> network ping -node Node8 -vserver vserver32 -destination 10.17.124.137
no answer from 10.17.124.137
 
Cluster1::> network ping -node Node73 -vserver vserver32 -destination 10.17.124.13
10.17.124.137 is alive
 
Cluster1::> network ping -node Node74 -vserver vserver32 -destination 10.17.124.137
no answer from 10.17.124.137
 
此路由已存在:
 
 
vserver32
0.0.0.0/0    10.17.124.1   20
 
已尝试访问网关、但也失败:
 
network ping -lif lif2  -vserver vserver32 -destination 10.17.124.1
no answer from 10.17.124.1
 
VLAN端口A1B-124 (LIF所在位置)上的数据包跟踪可显示请求、但无响应:
 

 
A1B端口上的数据包跟踪仅显示对ARP请求的响应。
 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

This is an internal KB article and its content should not be copy/pasted and shared with people outside of NetApp. Always seek Duty Manager authentication of caller for password reset requests. If you need further assistance post a question in Knowledge Xchange