跳转到主内容

IC 链路宽度已降级错误

Views:
Visibility:
Internal
Votes:
0
Category:
aff-series
Specialty:
hw
Last Updated:

适用于

AFF A700

问题

硬件互连链路上出现链路宽度降级错误,显示的链路速度为 4 倍,预期速率为 8 倍

Sat Apr 18 01:00:01 CDT [Node-17: statd: ic.linkWidthDegraded:error]: HA interconnect: Link width of link #0 degraded. Current: 4X, expected: 8X.
Sat Apr 18 01:00:00 CDT [Node-18: statd: ic.linkWidthDegraded:error]: HA interconnect: Link width of link #0 degraded. Current: 4X, expected: 8X.


Node 17

slot 1: HSL Interconnect
 Data Rate:      40 Gb/s (4X)<-------------
  Link State:      ACTIVE
  Port HA0a State:   DOWN
  QSFP Vendor:     Molex Inc.
  QSFP Part Number: 112-00435 A0
  QSFP Type:  Passive Copper 1m ID:00
  QSFP Serial Number: <Serial Number>
  Port HA0b State:   ACTIVE
  QSFP Vendor:     Molex Inc.
  QSFP Part Number:   112-00435 A0
  QSFP Type:  Passive Copper 1m ID:00
  QSFP Serial Number: <Serial Number>

Node 18

slot 1: HSL Interconnect
 Data Rate:      40 Gb/s (4X)<---------------
  Link State:    ACTIVE
  Port HA0a State:   DOWN
  QSFP Vendor:     Molex Inc.
  QSFP Part Number:   112-00435 A0
  QSFP Type: Passive Copper 1m ID:00
  QSFP Serial Number: <Serial Number>
  Port HA0b State:   ACTIVE
  QSFP Vendor:     Molex Inc.
  QSFP Part Number:   112-00435 A0
  QSFP Type:  Passive Copper 1m ID:00
  QSFP Serial Number: <Serial Number>

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

This is an internal KB article and its content should not be copy/pasted and shared with people outside of NetApp. Always seek Duty Manager authentication of caller for password reset requests. If you need further assistance post a question in Knowledge Xchange