跳转到主内容

IX4-T 1 Gb端口协商速率低至100 Mbps

Views:
2
Visibility:
Public
Votes:
0
Category:
fas-systems<a>2009963791</a>
Specialty:
hw
Last Updated:

适用场景

  •  FAS8200
  • ONTAP 9.7P22.

问题描述

  • 用于在节点的端口e0c上托管的SnapMirror的集群间LIF的运行 速度为100 Mbps、而不是1 Gbps。
  • 交换机端端口配置显示为1 Gb
  • 只会在节点的上观察到SnapMirror滞后

Node 1:
slot 0: 1/10 Gigabit Ethernet Controller IX4-T
e0c MAC Address:   XX:XX:XX:XX:XX:XX (auto-1000t-fd-up)
e0d MAC Address:     XX:XX:XX:XX:XX:XX (auto-unknown-fd-down)
Node 2:
slot 0: 1/10 Gigabit Ethernet Controller IX4-T
e0c MAC Address:     XX:XX:XX:XX:XX:XX (auto-100tx-fd-up) 
e0d MAC Address:    XX:XX:XX:XX:XX:XX(auto-unknown-fd-down)

  • 重新拔插/更换电缆后问题描述仍然存在

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.