跳转到主内容

如何避免在环境条件下自动关闭ONTAP

Views:
14
Visibility:
Public
Votes:
1
Category:
aff-series
Specialty:
hw
Last Updated:

适用场景

  • ONTAP 9
  • AFF型号
  • ASA型号
  • FAS型号

问题解答

警告

不建议执行以下活动、因为如果存在硬件问题、则可能会对存储系统中的重大问题进行发生原因。

仅在需要完成其他恢复或更新过程时禁用关机、并确保完成后重新启用关机。

在 LOADER 中使用 Bootarg 环境变量
  1. 此选项在 ONTAP 9.8 及更高版本中可用。
  2. 进入 加载程序提示符
  3. 为了防止在任何情况下关机, 请设置以下变量

LOADER-A>setenv bootarg.init.env_shutdown_override true

LOADER-A>saveenv

LOADER-A>printenv bootarg.init.env_shutdown_override

Variable Name     Value
-------------------- --------------------------------------------------
bootarg.init.env_shutdown_override true

  1. 完成故障排除,以解决因环境条件导致 ONTAP 自动关闭的问题。
  2. 故障排除完成后,必须启用自动关闭保护。  否则,可能会导致灾难性后果。
  3. 进入 加载程序提示符
  4. 删除以下变量以重新启用自动关机保护:

LOADER-A>unsetenv bootarg.init.env_shutdown_override

LOADER-A>saveenv

  1. 启动控制器并执行恢复

LOADER-A>bye

使用ONTAP 命令行

Please contact NetApp Technical Support or log into the NetApp Support Site to create a case. Reference this article for assistance with the solution. 

  • The solution requires Diagnostic-level recovery. 
  • The use of Diagnostic commands and recovery steps is potentially disruptive and should only be used with guidance from NetApp Support. 
 

 

追加信息

其他信息文本

 

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.