跳转到主内容

文件系统磁盘无效标签 - AutoSupport 消息

Views:
450
Visibility:
Public
Votes:
11
Category:
ontap-9
Specialty:
hw
Last Updated:

适用于

  • ONTAP 9
  • Data ONTAP 8 7-模式
  • callhome.dsk.label
  • callhome.fdsk.label
    • raid.config.filesystem.disk.bad.label

事件摘要

  • 当磁盘驱动器由于意外的 RAID 元数据而出现故障时,会出现此消息。
  • 通常是由于添加以前在不同 ONTAP OS 中使用的非零驱动器引起的。
  • 驱动器并没有真正出现故障。由于 ONTAP 版本不匹配,磁盘显示为bad label 失败。
[Node Name: config_thread: callhome.dsk.label:alert]: Call home for DISK BAD LABEL

验证

事件日志

event log show -severity * -Message-name *bad.label*

Fri Apr 29 14:11:31 +0200 [Node Name: config_thread: raid.assim.disk.nolabels:EMERGENCY]: Disk 0d.23.17 Shelf 23 Bay 17 [NETAPP X357_S163A3T8ATE NA51] S/N [S394NA0J219221] UID [5002538A:072721E0:00000000:00000000:00000000:00000000:00000000:00000000:00000000:00000000] has no valid labels. It will be taken out of service to prevent possible data loss.

Fri Apr 29 14:11:31 +0200 [Node Name: config_thread: raid.config.disk.bad.label:notice]: Disk 0d.23.17 Shelf 23 Bay 17 [NETAPP X357_S163A3T8ATE NA51] S/N [S394NA0J219221] UID [5002538A:072721E0:00000000:00000000:00000000:00000000:00000000:00000000:00000000:00000000] has bad or missing data on label.

命令行

storage disk show -broken

::> storage disk show -broken Original Owner: node1 Checksum Compatibility: block Usable Physical Disk Outage Reason HA Shelf Bay Chan Pool Type RPM Size Size --------------- ------------- ------------ ---- ------ ----- ------ -------- -------- 1.1.0 bad label 0b 1 0 A Pool0 FCAL 10000 132.8GB 133.9GB 1.2.6 bad label 0b 2 6 A Pool1 FCAL 10000 132.8GB 134.2GB Original Owner: node2 Checksum Compatibility: block Usable Physical Disk Outage Reason HA Shelf Bay Chan Pool Type RPM Size Size --------------- ------------- ------------ ---- ------ ----- ------ -------- -------- 1.1.0 bad label 0a 1 0 B Pool0 FCAL 10000 132.8GB 133.9GB 1.1.13 bad label 0a 1 13 B Pool0 FCAL 10000 132.8GB 133.9GB

解决方法

以下行动计划假定磁盘不是要迁移到新系统的关键数据磁盘。验证相关磁盘是否未存储生产数据。 
  1. 取消故障驱动器
  1. 取消故障驱动器以将其返回到备用池

::> priv set advanced
::*> storage disk unfail -s <disk_name>

  1. 根据需要多次重复上述步骤以取消故障其余驱动器
  2. 检查最近取消故障的驱动器是否显示在备用池中

::*> storage aggr status -s

  1. 下一步将是通过对驱动器进行校零来清除坏标签

::*> storage disk zerospares -owner <nodename>

  • 磁盘归零完成后,坏标签将清除

追加信息

此 AutoSupport 消息的常见原因:

驱动器清理已应用于驱动器 运行 disk sanitize release 命令后,磁盘未拥有或报告坏标签
MetroCluster IP- "Bad Label" 在运行 "metrocluster configuration-settings connection connect" 后立即出现 "metrocluster configuration-settings connection connect" 后的磁盘错误标签

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.