跳转到主内容

断电后 FAS27xx 端口 e0a、e0b 丢失

  1. 最后更新
  2. 另存为PDF
Views:
1
Visibility:
Public
Votes:
0
Category:
fas-systems
Specialty:
HW
Last Updated:

适用于

AFF A220、AFF C190、FAS2750、FAS2720

问题描述

  • 缺少板载网络接口（e0a/e0b）来自 sysconfig -a 和 network port show 然后断电。
  • 重新通电后启动时，控制台上报告以下错误消息：
Aug 01 11:19:28 [node1:netif.init.failed:ALERT]: Initialization of network interface e0a failed due to unexpected software error ix:eeprom_read:eec=75480832:-33.
Aug 01 11:19:28 [node1:netif.init.failed:ALERT]: Initialization of network interface e0a failed due to unexpected software error ix:18.
Aug 01 11:19:28 [node1:netif.init.failed:ALERT]: Initialization of network interface e0a failed due to unexpected software error ixgbe:5.

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.