跳转到主内容

端口XX的以太网连接器警告无法与连接器通信

Views:
17
Visibility:
Public
Votes:
0
Category:
disk-shelves<a>2009503226</a>
Specialty:
hw
Last Updated:

适用场景

  • ONTAP 9
  • FAS/AFF系统
  • NS224磁盘架

问题描述

  • NSM模块上报告了以太网连接警告:
[Node-01: dsa_worker0: ses.status.etherConn.warn:error]: NS224NSM100 (S/N SHFNCXXXX000047) shelf 10 on channel 0x Ethernet connector warning for port e0a: cannot communicate with connector.  This element is on the rear of the shelf at the top, on module A.
[Node-01: dsa_worker0: ses.status.etherConn.warn:error]: NS224NSM100 (S/N SHFNCXXXX000047) shelf 10 on channel 0x Ethernet connector warning for port e0b: cannot communicate with connector.  This element is on the rear of the shelf at the top, on module A.
  • 节点通过一个NSM模块丢失路径、事件日志中会报告以下警报:
[Node-01: nchmd: hm.alert.raised:alert]: Alert Id = NoPathToNSMA_Alert , Alerting Resource = 17438XXXXXXXXXXXXX raised by monitor node-connect
[Node-01: dsa_disc: shelf.config.tospha:info]: System has transitioned to single path HA attached storage
[Node-01: dsa_disc: callhome.dsk.redun.fault:error]: Call home for DISK REDUNDANCY FAILED
  • 受影响的NSM模块上出现琥珀色LED。
  • 节点过渡到单路径HA配置:

::> system node run -node <node>sysconfig -a

NetApp Release 9.8P12: Thu May 12 20:07:27 EDT 2022
   System ID: 0987654321 (Node-01); partner ID: 1234567890 (Node-02)
   System Serial Number: 8520XXXXX004 (Node-01)
   System Rev: A6
   System Storage Configuration: Single-Path HA

  • SAS连接子系统已降级:

::> system health subsystem show -subsystem sas-connect

          Subsystem: SAS-connect
            Health: degraded
     Initialization State: initialized
Number of Outstanding Alerts: 1
 Number of Suppressed Alerts: 0
             Node: Node-01, Node-02
  Subsystem Refresh Interval: 30m, 30m

  • 的输出 storage show fault 显示以下内容:

::> system node run -node <node> storage show fault

Enclosure Status: unrecoverable
Channel: 0x
Shelf: 10
Shelf Type: NS224NSM100
Module Type: NSM100

Temperature Sensors:
Element Status      Status Bytes  Status Descriptions
  1: OK         01,00,27,00   
  2: OK         01,00,2D,00   
  3: OK         01,00,2D,00   
  4: OK         01,00,2D,00   
  5: OK         01,00,2E,00   
  6: OK         01,00,2E,00   
  7: OK         01,00,3D,00   
 8: UNRECOVERABLE   04,00,3A,00   
 9: UNRECOVERABLE   04,00,3A,00   
 10: OK         01,00,40,00 

Enclosure:
Element Status      Status Bytes  Status Descriptions
  1: OK         01,00,02,00  FAIL

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.