跳转到主内容

ONTAP降级后、Emulex FC适配器处于脱载状态

  1. 最后更新
  2. 另存为PDF
Views:
4
Visibility:
Public
Votes:
0
Category:
fas-systems<a>20097272004</a>
Specialty:
hw
Last Updated:

适用场景

  • AF/FAS型号
  • ONTAP 9.8p6或更低版本
  • Emulex LPe35000 (LPe35004) FC适配器(部件号X1154)

问题描述

  • 将ONTAP降级到9.8P7以下的版本后、 Emulex LPe35000 (LPe35004)适配器端口将保持脱机状态
  • "Sysconfig -a"输出将适配器报告为 <offlined by system>
 
slot 2: Fibre Channel Target Host Adapter 2a
(Emulex LPe35000 (LPe35004) rev. 0, <OFFLINED BY SYSTEM>)
Firmware rev:   0.0.0.0
Host Port Addr:   000000
FC Nodename:    50:0a:09:xx:xx:xx:xx:xx (500a09xxxxxxxxxx)
FC Portname:    50:0a:09:xx:xx:xx:xx:xx (500a09xxxxxxxxxx)
Connection:     No link
Switch Port:    Unknown
slot 2: Fibre Channel Target Host Adapter 2b
(Emulex LPe35000 (LPe35004) rev. 0, <OFFLINED BY SYSTEM>)
Firmware rev:    0.0.0.0
Host Port Addr:   000000
FC Nodename:    50:0a:09:xx:xx:xx:xx:xx (500a09xxxxxxxxxx)
FC Portname:    50:0a:09:xx:xx:xx:xx:xx (500a09xxxxxxxxxx)
Connection:     No link
Switch Port:    Unknown
slot 2: Fibre Channel Target Host Adapter 2c
(Emulex LPe35000 (LPe35004) rev. 0, <OFFLINED BY SYSTEM>)
Firmware rev:    0.0.0.0
Host Port Addr:   000000
FC Nodename:    50:0a:09:xx:xx:xx:xx:xx (500a09xxxxxxxxxx)
FC Portname:    50:0a:09:xx:xx:xx:xx:xx (500a09xxxxxxxxxx)
Connection:     No link
Switch Port:    Unknown
slot 2: Fibre Channel Target Host Adapter 2d
(Emulex LPe35000 (LPe35004) rev. 0, <OFFLINED BY SYSTEM>)
Firmware rev:    0.0.0.0
Host Port Addr:   000000
FC Nodename:    50:0a:09:xx:xx:xx:xx:xx (500a09xxxxxxxxxx)
FC Portname:    50:0a:09:xx:xx:xx:xx:xx (500a09xxxxxxxxxx)
Connection:     No link
Switch Port:    Unknown
 
  • 适配器上的固件将显示0．0．0．0
  • 降级ONTAP固件期间的事件日志将在降级HBA固件时显示错误
 
8/30/2023 18:59:39  Node-01  ERROR  scsitarget.slifct.fwUpdErr: FC target HBA 2d failed to update
the firmware version from 12.8.435.3 to 12.4.320.1 with the status of 1.
8/30/2023 18:59:38  Node-01  ERROR   scsitarget.slifct.fwUpdErr: FC target HBA 2c failed to update
the firmware version from 12.8.435.3 to 12.4.320.1 with the status of 1.
   8/30/2023 18:59:38  Node-01  ERROR   scsitarget.slifct.fwUpdErr: FC target HBA 2b failed to update
the firmware version from 12.8.435.3 to 12.4.320.1 with the status of 1.
   8/30/2023 18:59:38  Node-01  ERROR   scsitarget.slifct.fwUpdErr: FC target HBA 2a failed to update
the firmware version from 12.8.435.3 to 12.4.320.1 with the status of 1.
 
   8/30/2023 19:01:04  Node-01  ERROR  scsitarget.fct.port.offline: Fibre Channel Target port 2d was
taken operationally offline due to too many errors received by the FCT driver.
   8/30/2023 19:01:04  Node-01  ALERT  scsitarget.hwpfct.initFailed: Initialization of adapter failed
on Fibre Channel target adapter 2d.
   8/30/2023 19:01:04  Node-01  ERROR   scsitarget.fct.port.offline: Fibre Channel Target port 2c was
taken operationally offline due to too many errors received by the FCT driver.
   8/30/2023 19:01:04  Node-01  ALERT   scsitarget.hwpfct.initFailed: Initialization of adapter failed
on Fibre Channel target adapter 2c.
   8/30/2023 19:01:04  Node-01  ERROR   scsitarget.fct.port.offline: Fibre Channel Target port 2b was
taken operationally offline due to too many errors received by the FCT driver.
   8/30/2023 19:01:04  Node-01  ALERT   scsitarget.hwpfct.initFailed: Initialization of adapter failed
on Fibre Channel target adapter 2b.
   8/30/2023 19:01:04  Node-01  ERROR   scsitarget.fct.port.offline: Fibre Channel Target port 2a was
taken operationally offline due to too many errors received by the FCT driver.
   8/30/2023 19:01:04  Node-01  ALERT   scsitarget.hwpfct.initFailed: Initialization of adapter failed
on Fibre Channel target adapter 2a.
 

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.