EMS报告"Partner SP固件不支持hw_Assist功能"错误

最后更新
另存为PDF

Views:: 9

Visibility:: Public

Votes:: 0

Category:: ontap-9

Specialty:: hw<a>2009846586</a>

Last Updated:

适用场景

AF-A700
ONTAP 9.12.1P7.
服务处理器(SP) 4.11

问题描述

EMS报告以下错误。

示例：

Thu Nov 09 20:24:17 [node09: cf_hwassist: cf.hwassist.IpNotConfigured:error]: cf hw_assist: Partner(node10)'s SP is not configured with the right IP address family. Use the "storage failover hwassist show" command for details.
 Fri Nov 10 04:36:17 [node09: cf_hwassist: cf.hwassist.FwUpgrade:error]: HA hw_assist: Partner(node10) SP firmware does not support the hw_assist feature.
 Fri Nov 10 12:48:17 [node09: cf_hwassist: cf.hwassist.FwUpgrade:error]: HA hw_assist: Partner(node10) SP firmware does not support the hw_assist feature.

Storage failover show 输出：

::*> storage failover show -fields hwassist-status
 node   hwassist-status
 ------ ---------------
 node01 active
 node02 active
 node03 active
 node04 active
 node05 active
 node06 active
 node07 active
 node08 active
 node09 inactive:SP on node10 is not capable of sending alerts over IPv4 address.
 node10 active