E0e 和 e0f 端口缺失导致 ONTAP 升级期间 BIOS POST 失败
适用场景
- FAS2720
- FAS2750
- EthernetController：1/10千兆位以太网控制器IX4-T
问题描述
- 升级 ONTAP 后，
e0e和e0f启动时无法识别端口。ONTAP 已启动且正在运行。
Sysconfig-a log:
slot 0: 1/10 Gigabit Ethernet Controller IX4-T
e0c MAC Address: ***** (auto-1000t-fd-up)
e0d MAC Address: ***** (auto-1000t-fd-up)
Device Type: X550
Firmware Version: 1.93-144.3
BIOS POST failure出现以下错误信息：
[SysFW.notice]: BIOS Version: 11.21
[SysFW.notice]: Device 10/0/0 (CNA0) missing
[IPMI.notice]: (PUA) Enable power to all PCIe slots
[IPMI.notice]: (PUA) Enable power to all PCIe on board device
[IPMI.notice]: (PUA) P_stat :slots=0x0,onboard_devs=0x0,final
[IPMI.notice]: (PUA) Power status of all PCIe slots unchanged
[Boot Loader.critical]: Abort Autoboot due to BIOS POST failure.
BIOS POST Failure(s) detected: PCIe device missing error detected. Abort AUTOBOOT
LOADER-B>
- 这
BMC event log包括 BMC 报告的明确 PCI 设备缺失错误。
[SysFW.notice]: Device 10/0/0 (CNA0) missing
[SysFW.notice]: Device 10/0/0 (CNA0) missing