跳转到主内容

磁盘在 "sysconfig -r" 中保持 "testing" 状态

Views:
311
Visibility:
Public
Votes:
0
Category:
fas-systems
Specialty:
hw
Last Updated:

适用于

用于测试的维护池中的驱动器

问题描述

  • NetApp 存储系统开始测试磁盘,并将其放入维护池。示例:

Thu Feb 20 03:54:54 JST [node-02: config_thread : raid.disk.maint.start:notice ]:Disk 0d.10.3 Shelf 10 Bay 3 [NETAPP X343_SSKBE1T8A10 NA01] S/N XXXXXXXX] <...>will be tested.

  • 维护测试 ONTAP 过程尚未完成,驱动器保持不变,没有任何进展。
  • sysconfig -rAutoSupport 部分报告处于维护状态的磁盘和 sysconfig -a处于失败状态的磁盘。示例:

sysconfig -a

slot 0: SAS Host Adapter 0d (PMC-Sierra PM8072 rev. C, SAS, <UP>)
   10.3 : NETAPP   X343_SSKBE1T8A10 NA01 1713.5GB 520B/sect (XXXXXXXX) (Failed)

sysconfig -r

Maintenance disks

RAID Disk   Device    HA SHELF BAY CHAN Pool Type  RPM  Used (MB/blks)   Phys (MB/blks)
---------   ------    ------------- ---- ---- ---- ----- --------------   --------------
testing   0a.10.3    0a   10  3   SA:B   0   SAS 10000 1713523/3509295616 1716957/3516328368 

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.