跳转到主内容

磁盘驱动器故障 LED 指示灯不正确地亮起而不会出现任何硬件故障

Views:
213
Visibility:
Public
Votes:
1
Category:
fas-systems<a>ONTAP 9</a>
Specialty:
hw
Last Updated:

状态信息

适用场景

  • ONTAP 9.6P3 及更低版本
  • 所有磁盘型号

问题描述

  • 磁盘驱动器故障LED (稳定琥珀色)未正确打开、未发生任何硬件故障
  • 更换故障磁盘后、磁盘仍保持琥珀色指示灯亮起
  • sysconfig -a 命令 sysconfig -r 显示硬件状态为正常

示例:

sysconfig -a
 slot 0: SAS Host Adapter 0a (PMC-Sierra PM8070 rev. C, SAS, <UP>)
  Firmware rev:       03.08.09.00
  Base WWN:           5:00a098:00b0d93:30
  Phy State:          [0] Enabled, 12.0 Gb/s
                      [1] Enabled, 12.0 Gb/s
                      [2] Enabled, 12.0 Gb/s
                      [3] Enabled, 12.0 Gb/s
  Mini-SAS HD Vendor:        Amphenol       
  Mini-SAS HD Part Number:   X66031A+A0     
  Mini-SAS HD Type:          Passive Copper (unequalized) 0.5m ID:00
  Mini-SAS HD Serial Number: APF18179087711
                .
                .
                .    
                01.19: NETAPP   X343_TA14E1T8A10 NA01 1713.5GB 520B/sect (88P0A1QRF09D)
                01.20: NETAPP   X343_STBTE1T8A10 NA02 1713.5GB 520B/sect (W3Z16F99)     
                01.21: NETAPP   X343_TA14E1T8A10 NA01 1713.5GB 520B/sect (88P0A1V0F09D)
                01.22: NETAPP   X343_HCBFE1T8A10 NA02 1713.5GB 520B/sect (08G3RZLZ)     

                01.23: NETAPP   X343_TA14E1T8A10 NA01 1713.5GB 520B/sect (88P0A1YBF09D)
    

sysconfig -r    
Pool1 spare disks (empty)

Pool0 spare disks

RAID Disk Device  HA  SHELF BAY CHAN Pool Type  RPM  Used (MB/blks)    Phys (MB/blks)
--------- ------  ------------- ---- ---- ---- ----- --------------    --------------
Spare disks for block checksum
spare   0a.01.20 0a    1   20  SA:A   0   SAS 10000 1713523/3509295616 1716957/3516328368
spare   0a.01.22 0a    1   22  SA:A   0   SAS 10000 1713523/3509295616 1716957/3516328368
spare   0a.02.23 0a    2   23  SA:A   0   SAS 10000 1713523/3509295616 1716957/3516328368

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.

 

  • 这篇文章对您有帮助吗?