在 PCI 总线上未检测到设备（ " 以太网：扳手端口 " ）

最后更新
另存为PDF

Views:: 31

Visibility:: Public

Votes:: 0

Category:: aff-series

Specialty:: hw

Last Updated:

适用于

AFF-A200
FAS2650
ONTAP

问题

在启动 ONTAP 期间，您可能会看到与以下类似的错误，并且系统将无法开机自检。
在启动期间，节点会报告以下错误并暂停到 LOADER 提示符：

Device ("Ethernet:Wrench Port" ) not detected on PCI BUS. Device could be purposely held in reset or has developed a physical defect or has a corrupt firmware. Halting the system because the device is critical for normal operations. Bootarg no-onboard-pcidev-check? can skip this check. Halting... BIOS Version: 11.0.2 Portions Copyright (C) 2014-2016 NetApp, Inc. All Rights Reserved. Initializing System Memory ... Loading Device Drivers ... Configuring Devices ... CPU = 1 Processor(s) Detected. Intel(R) Xeon(R) CPU D-1528 @ 1.90GHz (CPU 0) CPUID: 0x00050663. Cores per Processor = 6 32768 MB System RAM Installed. SATA (AHCI) Device: SV9MST6D120GLM41NP Boot Loader version 6.0 Copyright (C) 2000-2003 Broadcom Corporation. Portions Copyright (C) 2002-2016 NetApp, Inc. All Rights Reserved. BIOS POST Failure(s) detected: PCIe device missing error detected. Abort AUTOBOOT