跳转到主内容

在FAS9000和AFF A700上启动期间、DIMM映射错误为0x30

Views:
39
Visibility:
Public
Votes:
0
Category:
fas-systems<a>BIOS</a><a>DIMM映射</a><a>BURT 1195242</a><a>错误0x30</a>
Specialty:
hw
Last Updated:

适用场景

  • 采用10.4或更早版本BIOS的AFF A700
  • 采用10.4或更早版本BIOS的FAS 9000

问题描述

  • 重新启动后,系统无法启动,并显示错误 DIMM:x mapped out 代码 0x30
  • 错误:

System DIMM configuration is not supported by AFF-A700
Halting...

BIOS Version: 10.4
Portions Copyright (C) 2014-2017 NetApp, Inc. All Rights Reserved.

Initializing System Memory ...
Cold Boot required for Memory Initialization.
System is resetting.

Initializing System Memory ...
DIMM:5 mapped out. BIOS MRC HW R/W test error. Major / Minor Error Code: 0x30 / 0x1C
Complete channel mapped out.

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.