跳转到主内容

连接到Cisco Nexus Fabric Extender时控制器发生崩溃

Views:
26
Visibility:
Public
Votes:
0
Category:
fas-systems
Specialty:
hw
Last Updated:

适用场景

  • FAS9000
  • FAS8200
  • FAS27x0
  • FAS26x0
  • AFF A200
  • AFF A220
  • AFF A300
  • AFF A700
  • ONTAP 9
  • QLogic 8324 CNNA
  • Cisco Nexus 2348UPQ阵列扩展器(FEX)
  • Cisco Nexus N2K-C2232PP-10GE 阵列扩展器(FEX)

问题描述

  • 将qlogic适配器连接到Nexus FEX时、存储节点将发生panic
PANIC : PCI Error NMI from device(s):RPT(0,3,3):QLogic FC/10GbE CNA on Controller.
version: 9.5P15: Tue Nov 17 02:40:18 EST 2020
conf : x86_64.optimize
cpuid = 4
KDB: stack backtrace:
vpanic() at vpanic+0x6d9/frame 0xfffffe0258b59c50
panic() at panic+0x43/frame 0xfffffe0258b59cb0
platform_os2sp_port_present() at platform_os2sp_port_present+0x259/frame 0xfffffe0258b59ce0
psl_search_list() at 0xffffffff8213db10/frame 0xfffffe0258b59d20
generic_nmi_handler() at generic_nmi_handler+0xe4/frame 0xfffffe0258b59d60
trap() at trap+0x7f0/frame 0xfffffe0258b59f20
Xnmi() at Xnmi+0xd3/frame 0xfffffe028649e470
ql_rdwr_indreg32() at ql_rdwr_indreg32+0xca/frame 0xfffffe028649e4b0
ql_minidump() at ql_minidump+0x77a/frame 0xfffffe028649e660
ql_del_cdev() at ql_del_cdev+0x85f/frame 0xfffffe028649e800
devfs_allocv() at devfs_allocv+0x29dc/frame 0xfffffe028649e850
kern_ioctl() at kern_ioctl+0x230/frame 0xfffffe028649e8c0
sys_ioctl() at sys_ioctl+0x16c/frame 0xfffffe028649e990
amd64_syscall() at amd64_syscall+0x18b/frame 0xfffffe028649eab0
Xfast_syscall() at Xfast_syscall+0xfb/frame 0xfffffe028649eab0
--- syscall (54, FreeBSD ELF64, sys_ioctl), rip = 0x8004cd23a, rsp = 0x7fffffffea58, rbp = 0x7fffffffeb40 ---
 
PCI Error NMI from device(s):ErrSrcID(CorrSrc(0x2900),UCorrSrc(0)), RPT(0,2,0):QLogic FC/10GbE CNA in slot 2 on Controller.
  • 存储节点从崩溃状态启动后、CNNA端口将停留在初始化固件状态

cluster::> run -node node1 sysconfig -v 2
        slot 2: Fibre Channel Target Host Adapter 2a
                (QLogic CNA 8324 (8362) rev. 2, <INITIALIZING FIRMWARE>)
                Firmware rev:      8.9.0
                Flash rev:         6.0.1
                Host Port Addr:    000000
                FC Nodename:       50:0a:09:80:80:72:e6:d6 (500a09808072e6d6)
                FC Portname:       50:0a:09:88:80:72:e6:d6 (500a09888072e6d6)
                Connection:        No link
                Switch Port:       Unknown

  • 与交换机的连接显示其  闪烁、未连接或可能正常。
  • 将Cisco交换机升级到9.3 (8)版时、可能会触发此消息

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.